A walkthrough of the home inspection process — what the inspector examines, what you should watch for, and how to use the findings to protect your purchase.
What a Home Inspection Covers
A standard home inspection is a visual, non-invasive examination of the home's major systems and structure: roof, exterior, foundation, electrical, plumbing, heating and cooling, insulation, and interior. The inspector works through a standardized checklist, documenting condition and flagging defects. The inspection typically takes 2–3 hours for a single-family home. You receive a detailed written report with photos and recommendations. It's your opportunity to learn the home's true condition before finalizing.
The Roof and Exterior
The inspector examines the roof's age, condition, and remaining life; flashing, vents, and chimneys; gutters and downspouts; siding, brickwork, and exterior cladding; grading and drainage around the foundation. Roof replacement costs $8,000–$15,000+ depending on size and materials, so remaining life matters. Poor grading and drainage cause basement water issues — the most expensive hidden problem. Pay close attention to these findings.
Foundation and Structure
The inspector checks for foundation cracks, settlement, moisture intrusion, and structural concerns in the framing. Horizontal cracks, significant vertical cracks, and signs of bowing walls warrant a structural engineer's assessment. Foundation repairs can cost $10,000–$50,000+. Minor hairline cracks are common and usually benign, but the inspector should distinguish cosmetic from structural. This is where major expenses hide — ask questions.
Electrical and Plumbing Systems
The inspector examines the electrical panel, wiring, outlets, and grounding — flagging outdated or unsafe systems like knob-and-tube or aluminum wiring, which affect insurance and cost. They check plumbing: pipe material (galvanized is near end of life), water heater age, and signs of leaks or corrosion. Upgrading electrical or plumbing can cost thousands. Know these costs before finalizing your purchase decision.
Heating, Cooling, and Insulation
The inspector assesses the furnace and air conditioner age, condition, and efficiency; ductwork; and insulation levels in the attic and walls. Furnaces typically last 15–20 years; replacement costs $4,000–$8,000. AC units last 12–15 years. Poor insulation means higher energy bills and comfort issues. Knowing the age and condition of these systems helps you budget for upcoming replacements and negotiate if they're near end of life.
Moisture, Mould, and Ventilation
Moisture is the most expensive hidden issue. The inspector checks for basement dampness, water staining, mould signs, attic ventilation, and bathroom/kitchen exhaust. Inadequate ventilation causes moisture buildup, mould, and rot. Water intrusion repairs range from $5,000 (grading and waterproofing) to $30,000+ (foundation waterproofing and weeping tile). Never dismiss moisture findings — investigate them fully before waiving your inspection condition.
The Bottom Line
A home inspection covers roof, exterior, foundation, electrical, plumbing, HVAC, and moisture — the systems that cost the most to repair. Attend the inspection, ask questions, and use findings to negotiate or decide. Book a free buyer consultation and I'll explain how I help clients use inspections strategically to protect their purchase.


